Viewing Vehicle Information - BGS technic 63311 Manual De Instrucciones

3) If the vehicle supports both types of tests, then both
types shows on the screen for selection.
4) Use SCROLL button to view the status of the MIL light
(ON or OFF) and the following monitors:
Misfire monitor -- Misfire monitor
Fuel System Mon -- Fuel System Monitor
Comp. Component -- Comprehensive Compon. Monitor
EGR -- EGR System Monitor
Oxygen Sens Mon -- O2 Sensors Monitor
Catalyst Mon -- Catalyst Monitor
EVAP System Mon -- Evaporative System Monitor
Oxygen Sens htr --O2 Sensor Heater Monitor
Sec Air System -- Secondary Air Monitor
Htd Catalyst -- Heated Catalyst Monitor
A/C Refrig Mon -- A/C system Monitor
5) If the vehicle supports readiness test of "This Drive
Cycle", a screen of the following will be displayed:
The number "x/x" to the upper rig ht corner of the screen indicates total number of screens the
retrieved data cover and sequence of currently displayed data.
6) Press ENTER/EXIT button to return to previous menu.

4.7 Viewing Vehicle Information

The Vehicle Info function enables retrieval of the Vehicle Identification No. (VIN), Calibration ID Nos.
(CINs), Calibration Verification Nos. (CVNs) and in use Performance Tracking on 2000 and newer
vehicles that support Mode 9.
1) Use SCROLL button to select Vehicle Info. from
Diagnostic Menu and press ENTER/EXIT button.
2) Wait a few seconds or press ENTER/EXIT button to
continue.
12