Exiting Obdii Test - BGS technic 63311 Manual De Instrucciones

If the vehicle does not support this mode, a "The selected
mode is not supported!" message shows on the display. If
more than one module is detected, you will be prompted to
select a module before test.
Use SCROLL button to select a module and press
ENTER/EXIT button.
3) Wait a few seconds while the code reader reads vehicle
information.
4) From Vehicle Info. menu, use SCROLL button to select
an available items to view and press ENTER/EXIT button.
5) View retrieved vehicle information on the screen.
6) Press ENTER/EXIT to return to previous menu.

4.8 Exiting OBDII Test

1) To exit OBDII test, use SCROLL button to select Exit
from Diagnostic Menu and press ENTER/EXIT button.
2) A warning message comes up asking your confirmation.
3) If you do want to exit OBDII test, press ENTER/EXIT button.
If you do not want to exit, use SCROLL button the select NO and press ENTER/EXIT button to return.
13