Alliance Laundry Systems UW 60 PV Suplemento De Instrucciones De Instalacion, Mantenimiento, Operacion Y Programacion página 14

Installation
7. Carefully lower top section over frame sides.
Insert the eight top section bolts and four frame
support bar bolts. Fully tighten the corresponding
nuts with the corresponding bolts.
8. Level the frame top section and sides. Align with
the washer-extractor.
Top Section Not Removed
Rear View
1 Top Section
2 Frame Support Bar
3 Frame Sides
4 Top Section Bolts
12
NOTE: No part of the washer-extractor and the
WSS should be touching. If the machine requires
elevating during bolt down then the WSS will
require the same amount.
9. Tighten mounting nuts and washers to secure
frame to floor.
1
2
3
5 Top Section Nuts
6 Frame Support Bar Nuts
7 Frame Support Bar Bolts
Figure 3
Top Section Removed
5
6
Side View
1
4
2
7
3
Q042I
F232122