mAINTENANCE
Regular maintenance must be performed on the Indoor Cycle for optimal performance and longevity. please read and follow all
instructions below. If the Indoor Cycle is not maintained as described, components may wear excessively and the Indoor Cycle may
become damaged. Improper maintenance will void the warranty terms. If you have questions about maintenance, contact your local
distributor.
Note: Many maintenance procedures require lubricant spray. Manufacturer recommends WD40, Brunox or a similar solvent free lubricant.
DAILy mAINTENANCE
1. Make sure that the Indoor Cycle is level. If the indoor cycle rocks on your floor, turn the leveling feet underneath the front or rear
stabilizer until the rocking motion is eliminated.
2. After exercising, the Indoor Cycle should be disinfected and cleaned to maintain a hygienic environment. First, apply a disinfectant
spray to the handlebars and the saddle. Using a lint-free cloth, dry the handlebars and the saddle. Next, apply a small amount of
disinfectant to a lint-free cloth and clean the adjustment knobs and the adjustment handles. Avoid using strong detergents on the
Indoor Cycle frame.
wEEkLy mAINTENANCE
1. Apply a small amount of the lubrication spray to a lint-free cloth, and thoroughly clean the frame, the handlebar slider and seat
sliders the flywheel and the plastic parts of the Indoor Cycle.
2. (pictured right) For optimal performance of the resistance system, and to minimize
wear on the brake pad, the solvent free lubricant spray should be applied to the brake
pad using the lubrication holes on the plastic part of the brake pad. If fuzz or lint appears
on the brake pad, the brake pad has become too dry—lubricant spray should be applied
more frequently. Make sure the brake pad is thoroughly soaked from end to end with
lubricant spray. then, wipe the excess off.
18