Livestrong LS9.9IC Manual Del Propietário página 9

ASSEMBLY STEP 5 & 6
Connect the 2 ends of the sensor
A
cable. take the cable inside the
handlebar frame tube and reach it
through the vertical handlebar stem
to connect it with the cable reaching
out of the upper Handlebar part.
Slide upper part of the handlebar into the handlebar stem and
B
connect the 2 pieces with the 7 Allen bolts provided.
make sure that the connecting Allen bolts are appropriately tightened
and Handlebar does not wobble because of a loose connection.
turn the front Adjustment Knob counter clockwise, and pull the
C
adjustment knob to fully insert the vertical Handlebar Stem into
the Frame. Next, bring the Handlebar Stem to the desired height,
release the adjustment Knob so pin engages with the holes of
the vertical stem and turn the Adjustment Knob clockwise to
retighten until it is secure.
please don't adjust the height of the vertical handlebar stem
D
beyond the stop mark to avoid instability.
Do not over tighten the connecting
bolts. Make sure the pop pin
adjustment knob is fully engaged and
the Handlebar post does not slide
while riding.
9