Tools Needed For Assembly; Need Help - Livestrong LS9.9IC Manual Del Propietário

LS9.9IC pARtS INCLUDED
Emergency Brake & Resistance Knob
Saddle
Adjustment Knob
Pedal
Belt Guard
Maintenance Cover
Levelling Feet
6
Computer Console
Handlebar
Adjustment Knob
Brake Pad
Flywheel
Transport Wheel
PRE ASSEMBLY

TOOLS NEEDED fOR ASSEmbLy:

F Wrench: 17/19mm, 13/15mm
F Allen Wrench: 3mm, 6mm

NEED HELP?

If you have questions or if there are any missing
parts, contact Customer tech Support.
Contact information is located on the back
panel of this manual.
UNPACkING
Due to the weight of the indoor cycle, it is
recommended that two persons perform the
assembly. Set the indoor cycle in a cleared area
and remove all packing materials; do not dispose of
the packing materials until assembly is completed
NOtE: During each assembly step, ensure that ALL
nuts and bolts are in place and partially threaded in
before completely tightening any ONE bolt.
NOtE: A light application of grease may aid in the
installation of hardware. Any grease, such as lithium
bike grease is recommended.