Publicidad
Idiomas disponibles
Idiomas disponibles
Detach the pulse generator plug for the inlet camshaft.
Remove the access plug (for lower screw of the chain
guide) and unscrew and remove the chain guide
screw.
NOTE: Ensure screwdriver has a firm attachment
to the screw as it is withdrawn, as screw can fall
into the engine.
Unscrew and remove the upper screw of the chain
guide.
Remove the chain guide.
NOTE Guide is held in place by 4 lugs and will
need to be carefully compressed to release the
lugs, for removal of the guide.
Unscrew and remove the banjo bolt of the oil supply
pipe (exhaust camshaft). (This is so the pipe can be
pushed backwards and out of the way, once the
Camshaft Setting Plate Assembly has been removed).
Remove complete D805 Camshaft Setting Plate
Assembly and push the oil supply pipe towards the
rear, approx 20mm.
Publicidad
