FRICON CLS Uso Y Mantenimiento página 44

SMR
Key
PRG/MUTE
ON-OFF/UP
AUX/DOWN
SET/DEF
Manual Defrosting
Aside from automatic defrosting, it is possible to activate manual defrosting when
the temperature conditions occur.
Pressing the button
message appears on the screen.
Adjust Clock
Go into Parameters:
• Press the key for 3 seconds
• Input the corresponding password: "22".
• Pressing the button
message appears on the screen.
Navigate through the corresponding parameters by pressing the keys
and change according to the following table.
Press down for more than 3 seconds, access the "F" parameters
(frequent) or the menu to define the password or access the "C"
(settings) parameters menu; if there is an active alarm: silences the
alarm.
Press down for more than 3 seconds to turn OFF the control panel;
Press down for more than 1 second to turn ON the control panel; Upon
defining parameters, increase the amount exhibited or switch over to
the next parameter.
If pressed for more than 1 second, it activates / deactivates the
auxiliary output (lighting); when setting the parameters, decrease the
displayed value or change to the previous parameter.
Press down for more than 1 second to view and / or allow the user to
define the set point; press down for more than 5 seconds to initiate
manual defrosting.
for 5 seconds until the DEF
for 5 seconds until the DEF
Press Key
.
44
English
and / or