FRICON CLS Uso Y Mantenimiento página 45

SMR
Parameters to change
tc - y
tc - m
tc - d
tc - u
tc-h
tc - n
NOTES:
• After modifying all the parameters, record them by pressing down the key
continuously until the temperature appears.
• During new installation, adjust the clock; otherwise, it may defrost outside the
pre-set time. Also adjust the time for turning the light on / off.
Set-Point Adjustment
• Press the button
• Change the Set-Point value using the arrow buttons.
• Validate with button
NOTE:
• Pay attention to the preservation temperature specified for your products!
Chiller – Freezer mode change
• Press button
until the screen shows "bn0".
During the process, the controller
will restart. Press the button until
"bn0" appears.
• bn0" appears on the screen
• bn0" appears on the screen
• Use the up and down arrow
buttons
settings:
a. bn1 - Freezer mode
Current month
Current day of the month
Current day of the week
Current minute
(one touch).
(one touch).
plus button
to select different
Meaning
Current year
Current hour
45
English
Action
Confirm by pressing the
key.