Install The Side Jamb Seals; Adjust The Side Door Panels - Kohler K-1000-H2 Guia De Instalacion

Side Jamb Seal
Footbath

20. Install the Side Jamb Seals

Lubricate one of the side jamb seals with glass cleaner.
Starting at the bottom of one of the center jambs, insert the side jamb seal into the center jamb
groove.
Trim the top of the seal as needed.
Repeat for the other side jamb seal.

21. Adjust the Side Door Panels

Use the wrench provided to loosen a roller nut on one of the side door assemblies.
Adjust the height of the door panel by turning the cam roller with the wrench so the corner of the
bottom deflector just rests on the acrylic surface of the footbath.
Tighten the roller nut.
Loosen the other roller nut, and adjust the side door height by turning the cam roller with the
wrench so the side door edge lines up perfectly with the side jamb seal.
Tighten the roller nut.
Check that the bottom deflector just rests on the acrylic surface of the footbath across the entire
deflector length.
Adjust the side door cam roller as needed to ensure proper contact of the bottom deflector with the
acrylic surface of the footbath and parallel alignment between the side door handle edge and the
side jamb seal.
Repeat for the other side door assembly.
Kohler Co.
Side Jamb
Seal
TOP VIEW
Center Jamb
19
Side Door
Assembly
Center
Door Panel
Bottom Deflector
Roller Nut
Side Door
Assembly
Side Jamb
Seal
Footbath
1032108-2-A