Optimizing An Rgb Image Automatically; Adjusting The Image Using Auto Adjust; Adjusting Volume Up & Down - NEC NP2000 Manual Del Usuario

Optimizing an RGB Image Automatically

Adjusting the Image Using Auto Adjust

Optimizing an RGB image automatically.
Press the Auto Adjust button to optimize an RGB image automatically.
This adjustment may be necessary when you connect your computer for the first time.
[Poor picture]
[Normal picture]
NOTE:
• Some signals may take time to display or may not be displayed correctly.
• The Auto Adjust function does not work for component, video signals.
• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock and Phase manually. ( → page 75)
Adjusting Volume Up & Down
Sound level from the speaker and the AUDIO OUT
jack (Stereo mini) on the projector can be adjusted.
NOTE:
• Volume control is not available with the SELECT
button when an image is enlarged by using the MAG-
NIFY (+) button or when the menu is displayed.
• The sound level is set to 20 at the factory.
3. Projecting an Image (Basic Operation)
SELECT
3D REFORM AUTO ADJUST SOURCE
or
Increase volume
Decrease volume
33
LASER
L-CLICK R-CLICK
MOUSE
FREEZE
ASPECT LAMP MODE AUTO ADJ.
VOLUME MAGNIFY PAGE
UP
DOWN
PICTURE 3D REFORM
PIC-MUTE HELP
SELECT
3D REFORM AUTO ADJUST SOURCE ON/STAND BY
LASER
L-CLICK R-CLICK
MOUSE
FREEZE
ASPECT LAMP MODE AUTO ADJ.
VOLUME MAGNIFY PAGE
UP
DOWN
PICTURE 3D REFORM
PIC-MUTE HELP
PC CARD
LAMP
STATUS
POWER