ELICA EFS130 Guía De Instrucciones página 6

Replace the incandescent light bulb (EFS130 series models)
Turn off the range hood and allow the light
bulb to cool.
1. Disconnect power.
2. Squeeze the plastic lens cover and
remove it from the hood.
3. Screw a new 120v 75W (maximum),
A19 light bulb into socket.
4. Replace lens cover by squeezing cover
and inserting tabs into slots.
5. Reconnect power.
6. If new light does not operate, make sure
the lamp is inserted correctly before
calling service.
ELICA North America
TO OBTAIN SERVICE UNDER WARRANTY
Owner must present proof of original purchase date. Please keep a copy of your dated proof of purchase (sales slip) in order to obtain service under warranty.
PARTS AND SERVICE WARRANTY
For the period of two (2) years from the date of the original purchase, Elica will provide free of charge, non consumable parts or components that failed due to manufacturing
defects. During these two (2) years limited warranty, Elica will also provide free of charge, all labor and in-home service to replace any defective parts.
WHAT IS NOT COVERED
Damage or failure to the product caused by accident or act of God, such as, flood, fire or earthquake.
Damage or failure caused by modification of the product or use of non-genuine parts.
Damage or failure to the product caused during delivery, handling or installation.
Damage or failure to the product caused by operator abuse.
Damage or failure to the product caused by dwelling fuse replacement or resetting of circuit breakers.
Damage or failure caused by use of product in a commercial application.
Service trips to dwelling to provide use or installation guidance.
Light bulbs, metal or carbon filters and any other consumable part.
Normal wear of finish.
Wear to finish due to operator abuse, improper maintenance, use of corrosive or abrasive cleaning products/pads and oven cleaner products.
WHO IS COVERED
This warranty is extended to the original purchaser for products purchased for ordinary residential use in North America (Including the United States, Guam, Puerto Rico, US Virgin
Islands & Canada).
This warranty is non-transferable and applies only to the original purchaser and does not extend to subsequent owners of the product. This warranty is made expressly in lieu of all
other warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose and all other obligations on the part of
Elica North America, provided, however, that if the disclaimer of implied warranties is ineffective under applicable law, the duration of any implied warranty arising by operation of
law shall be limited to two (2) years from the date of original purchase at retail or such longer period as may be required by applicable law.
This warranty does not cover any special, incidental and/or consequential damages, nor loss of profits, suffered by the original purchaser, its customers and/or the users of the
Products.
WHO TO CONTACT
To obtain Service under Warranty or for any Service Related Question
Please Call:
Elica North America Authorized Service at (888) 732-8018
Or by Writing To:
Elica North America, Attention Customer Service,
6658 156th Avenue SE,
Bellevue, WA 98006 USA
infoamericas@elica.com
Replace the halogen lamp (ENM230 & ENM236 series models)
B
A
A. Light bulb socket (A19)
B. Lens cover
WARRANTY
Two years limited warranty
6
Turn off the range hood and allow the halogen
lamp to cool. To avoid damage or decreasing the
life of the new bulb, do not touch bulb with bare
fingers. Replace bulb, using tissue or wearing
cotton gloves to handle bulb. If new lamps do
not operate, make sure the lamps are inserted
correctly before calling service.
1. Disconnect power.
2. Use a flat-blade screwdriver and gently pry the
light cover loose.
3. Remove the lamp and replace with a 120-volt,
40 watt maximum, halogen lamp made for a
G-9 base.
4. Replace the light cover.
5. Reconnect power.