Install The Handles - Kohler K-149 Guia De Instalacion

Handle

4. Install the Handles

Handles that are marked "COLD" with a blue tape must always
be installed into the mounting hole on the right as viewed from
the front of the sink.
Turn the cold and hot valves to the closed position.
Twist one handle setscrew counterclockwise until it clears the
opening inside each cold and hot handle.
Align the cold handle so the text on the ceramic button faces
straight forward. Slide the cold handle onto the stem extension.
Left is hot and right is cold. Twist the handle setscrew clockwise
until tight.
Align the hot handle so the text on the ceramic button faces
straight forward. Slide the hot handle onto the stem extension.
Left is hot and right is cold. Twist the handle setscrew clockwise
until tight.
5. Installation Checkout
Ensure that all connections are tight.
Open the drain.
Turn on the main water supply.
Twist the aerator counterclockwise until it is removed from the
spout.
Open both hot and cold valves.
112471-2-AB
Setscrew
6 Kohler Co.