Publicidad
Idiomas disponibles
Idiomas disponibles
drilling with a Ø 6 mm bit. Start to assemble the handrails onto the balusters with the 002031 components,
starting from the bottom. Continue mounting the handrails, inserting the 031073, 031077 joint components
and the 002011 fixing screws. Make sure the balusters are vertical and rotate the sections of handrail until
they are perfectly aligned (Fig. 2).
51. When the last baluster on the staircase is reached, cut excess handrail at right angles with a saw for wood (Fig. 2).
52. Complete handrail by fixing component 031061, using components 011069 and 004034, drill with a 6 mm
bit (Fig. 2).
53. Fit parts BF1 to treads, using fittings 002040, in an intermediate position, drilling with a Ø 4,5 mm bit.
Determine the height of the intermediate columns, measuring the distance from handrail to tread, deducting
5 mm for the thickness of component BF1, and cutting the balusters on the free side. Once cut, insert the
columns into the BF1 details, before fixing them to the handrail. Make sure they are vertical before tightening
them with component 001004 (Fig. 2) (Fig. 6) (Fig. 8).
54. Complete assembly of railing, fitting components 031065 into the lower part of balusters 127002 and
components 031075 into side of treads (Fig. 2).
Assembly of 020 balustrade
55. Screw component 033063 on to brace 046036 with the 011038 screws (Fig. 2). Cut the 121028 post at 90 cm,
assemble it with the 033149 fixing component and items 011063 and 005036, insert it into component
033063 and fix it with items 001004, positioning the 033149 tie according to the direction of the handrail.
56. Position components 033146 on landing, using components 002040 and 001004. Drill landing with a 4.5 mm
bit, keeping a distance between centres of no more than 12 cm.
57. Position balusters 127004 and tighten component 001004 (Fig. 2).
58. Fix straight handrail 140053 using components 002031 (Fig. 2).
59. Depending on position and presence of walls around the stairwell, it may be necessary to position one or two
extra balusters 127004 (Fig. 9).
60. In this case, a space must be considered that is at the same distance from the other balusters or from the
wall. Drill landing with a 5 mm bit and assemble with components 033146, 001004 and 002040 (Fig. 2).
61. Assembly of floor-mounted balustrade, if applicable (Fig. 15)
Determine the position of the posts on the floor, on average one every 12 cm and at a distanza of 8 cm from
the edge.
Take care: for circular balustrades, use the circular handrail to determine the distance of the posts from
the edge of the floor aperture – this distance varies according to the radius of the circular handrail supplied.
Drill with a Ø 12 mm bit and assemble components 033146 with items 008007. Fix the first balustrade
balusters (H= 910 mm) using component 033010 and items 008004, 011053, 033056 and 031066 (drill
with an Ø 8 mm bit). Insert the remaining 127004 balustrade balusters (H= 910 mm) into the 033146
components, with the 126034 reinforcing baluster and components 031066 about every metre, and lock
them with components 001004. Assemble the 140053 or 140073 handrails to the balusters with the
002031 components using items 031076 and 046011 for straight balustrades and items 031073, 031077
and 002011 for circular balustrades. Assemble any 031061, 031072, 031071 connecting components and
the 031061 terminal components.
Final assembly
62. To further reinforce the staircase at intermediate points, fix components 033010 to wall and join to the
balusters, using components 033056 and 031066. Drill with an 8 mm bit and use components 008004,
011053, 011057, 005035 (Fig. 12) (Fig. 14).
11 - Genius 010 - 020_2:Easy
Publicidad
