Installation; Downloading The Globalguard Pc Setup Software; Changing The Pin Code; Setting The Time And Date - Honeywell Friedland GlobalGuard FGGK Serie Manual De Software

4

Installation

Make sure that you are connected to the internet. Switch on the control panel and the gateway.

Downloading the GlobalGuard PC setup software

1. Go to www.friedlandproducts.com
2. Download the GlobalGuard PC setup software.
3. Install the software.
4. Install Microsoft .Net Framework V4.0, if requested during the installation. After the installation the application icon
will appear on the desktop.
4.1.1

Changing the PIN code

The User PIN code is used to access the control panel. The system will prompt the user for Admin PIN code, before it reads the
data from the control panel. The factory preset Admin PIN code for the control panel is "1234". When you use the system for
the first time, change the default PIN code.
4.1.2

Setting the time and date

Make sure that you set the time and date of the system to the same time and date of the PC.
4.1.3

Registering

You must register the gateway and create an account to use the online GlobalGuard software.
1. Version information
2. Date and time
3. Minimize
4. Maximize
5. Exit
6. Directory settings
7. Language
(English, French, Italian, Spanish, Portuguese, Czech)
8. Play/Resume
9. Stop
10. Slow Forward
11. Fast Forward
12. Zoom In
13. Zoom Out
14. Photograph
15. Mute/Unmute
16. Volume
1. Go to https://globalguard.friedland.co.uk.
2. If you are a new user, click "HERE".
3. Enter the "MAC ID" located on the rear of the IP
gateway.
4. Follow the instructions.
Note:

You must accept the EULA terms and conditions.

You must select the link in the confirmation e-mail to
log in.

You must accept the active X prompt bar.

Store your login details in a safe place.
11