Honeywell Friedland GlobalGuard FGGK Serie Manual De Software página 6

3.1.4.1 PROGRAMMES
A programme is a set of action(s) that are activated immediately when called upon by the user. Programmes can be assigned to
the home automation buttons (I/II/III) on the control panel, so that they are activated when the user presses the buttons on the
control panel, the keys on the home page of the PC setup software or in the online remote access software or smartphone app.
Item
NAME
NUMBER
ICON
SOUND
PROGRAMME
Step 1
(Security mode)
NO SETTING
FULLY ARM
PART-ARM-I
PART-ARM-II
DISARM
HOLIDAY ARM
Step 2
(Action)
NO ACTION
ALL ON
ALL OFF
INDIVIDUAL
WHERE USED
Description
Name of the programme.
Number of the programme.
Icon of the programme. The icon can be changed.
Sound of the programme. Select "None" or chime sound.
Status of the programme:
Select "ENABLE" to activate the programme.
Select "DISABLE" to deactivate the programme.
Use the current arming mode for the control panel without making changes.
Set the arming mode to "FULLY ARM".
Set the arming mode to "PART-ARM-I".
Set the arming mode to "PART-ARM-II".
Set the arming mode to "DISARM".
Set the arming mode to "HOLIDAY ARM".
Take no action when you switch on or off.
Switch on all on/off receiver devices that have "ALL ON" checked.
Switch off all on/off receiver devices.
Switch on/off particular receiver devices.
Show where the selected programme is used (e.g. in a schedule).
To add and maintain up to 16 programmes.
Note: The "PROGRAMMES" button becomes grey when
you have reached the maximum number of programmes.
6