Important Safety Instructions - Danby DER2009W Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION INSTRUCTIONS
WARNING:
If the information in this manual is not followed exactly, a fire or electrical shock may result causing
property damage, personal injury or death.
This appliance must be properly grounded.
IMPORTANT:
Save these instructions for the local electrical inspector's use.
Observe all governing codes and ordinances.
BEFORE STARTING
INSTALLER:
Read all instructions contained in these installation instructions before installing range.
Leave installation instructions with homeowner.
Proper installation is the responsibility of the installer.
HOMEOWNER:
Keep installation instructions for future reference.
PARTS INCLUDED
Anti-Tip bracket
Anchor sleeves
Bolts
WARNING:
For personal safety, remove house fuse or open circuit breaker before beginning installation.
All clearances and spacing dimensions must be met for safe use of your range.
Be sure your appliance is properly installed and grounded by a qualified technician.
WARNING:
To reduce the risk of tipping, the range must be secured by properly installed anti-tip bracket
All ranges can tip.
Injury to persons could result.
Install anti-tip device packed with range.
See Installation Instructions.
If you pull the range out and away from the wall for any reason, make sure the Anti-Tip bracket is engaged when the range
is pushed back against the wall.
READ AND SAVE THESE INSTRUCTIONS
Adjustable wrench or channel lock pliers
Phillips screwdriver
Electric or hand drill
Wood floors: 3/16" drill bit
Concrete/ceramic floors: 13/32" carbide-
tipped masonry drill bit
3/8" nut driver

IMPORTANT SAFETY INSTRUCTIONS

Failure to do so could result in serious injury or even death.
ANTI-TIP DEVICE
provided with the range.
ELECTRIC AND CERAN-TOP RANGES
TOOLS YOU WILL NEED
Tape measure
Safety glasses
Pencil
Level
Hammer (may be needed for anchors)

Publicidad

Tabla de contenido
loading

Tabla de contenido