Ketosens Blood Β-Ketone Meter Display; Preparation; Setting Up Your System; Adjusting The Date And Time - i-SENS KetoSens Manual Del Usuario

KetoSens Blood β-Ketone Meter Display
01 02 03 01
04
02
05
03
07
06
07 08
09
Test results
04
10 11
05
meter is ready for the application of a drop of blood or control
solution
alarm:
appears when the time alarm has been set
06
mmol/L: unit for measuring blood β-Ketone
07
KETONE:
appears when the KetoSens strip is inserted, and
08
when the test results are saved or displayed
Battery symbol: indicates meter batteries are running low and
09
need to be replaced
Date/temperature
10
Time
11
Note: It is recommended to check if the display screen on the
meter matches the illustration above every time the meter
turns on. Do not use the meter if the display screen does not
exactly match the illustration as the meter may show incorrect
results.
14 www.i-sens.com
Memory recall mode: appears
when test results stored in the
memory are displayed
Mute symbol:
appears only when
the sound is set to OFF
Control Solution flag: appears
when the control solution test results
are saved or displayed
Blood insertion symbol :
indicates

Preparation

Setting Up Your System

Press and hold the S button for 3 seconds to enter the SET
mode. After all settings are finished, press and hold the S button
for 3 seconds to turn off the meter.
Press the ◀ or ▶ button to change values. Press and hold the ◀
or ▶ button to scroll faster.

Adjusting the Date and Time

Step 1 Entering SET Mode
Press and hold the S button for 3
seconds to enter SET mode. After
all the segments flash across the
screen, 'SET' will show up.
Press the ◀ or ▶ button to select
'YES' and press the S button to go
to the next step.
Step 2 Setting the Year
Press the ◀ or ▶ button until the correct
year appears. When the present year
appears, press the S button to confirm
your selection and to go to the next step.
www.i-sens.com 15