i-SENS KetoSens Manual Del Usuario página 46

Sistema de monitoreo de b-cetona en sangre
Ocultar thumbs Ver también para KetoSens:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• We have validated Clorox® Germicidal Wipes, with 0.55%
sodium hypochlorite as the active ingredient, for disinfecting
the KetoSens meter and lancing device. It has been shown
to be safe for use with the meter and lancing device. This
disinfectant is available commercially in towelette form. In
addition to KetoSens Blood β-Ketone Monitoring System
instruction, please read the instructions provided by the
manufacturer of Clorox® Germicidal Wipes before using it.
Name
Clorox® Germicidal Wipes
Manufacturer
Clorox® Professional Products Company
[Phone] 1 800 537 1415
[Website] www.cloroxprofessional.com
EPA registration
67619-12
number
Active
Sodium Hypochlorite: 0.55%
ingredients
Note:
The disinfectant products can be purchased through
online retailers (e.g. Amazon) or by telephone at the
manufacturer. To find out where to purchase the disinfectant
product, please contact the manufacturer or visit their
website as listed above.
Pre-cleaning and Disinfection Procedures:
Open the cap of the
Clorox Germicidal
Wipes container and
pull out 1 towelette
and close the cap.
38 www.i-sens.com
Wipe the entire surface of the meter 3 times horizontally and
3 times vertically using one towelette to pre-clean blood and
other body fluids.
Front
Dispose of the used towelette
in a trash bin.
Pull out 1 new towelette
and wipe the entire
surface of the meter 3
times horizontally and 3
times vertically using a
new towelette to remove
bloodborne pathogens.
⑤ Dispose of the used towelette in a trash bin.
⑥ Allow exteriors to remain wet for 1 minute, then wipe the
meter using a dry cloth.
Back
Both sides
dry cloth
www.i-sens.com 39

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para i-SENS KetoSens

Tabla de contenido