Setting The Alarm Function; Setting The Time Alarms (Alarm 1-3) - i-SENS KetoSens Manual Del Usuario

Step 2
Use the ▶ button to scroll
through the stored test
results, starting from the
most recent and ending
with the oldest. Press the
◀ button to return to the
result seen previously.
After checking the stored test results, press the S button to turn
off the meter.
Note: The control solution test results saved with the
symbol will be displayed with the
the stored test results.
34 www.i-sens.com
◀ button
▶ button
symbol when you review

Setting the Alarm Function

Three types of alarms can be set in the KetoSens Meter.
The alarms ring for 15 seconds and can be silenced by pressing
any button or by inserting a test strip.
Setting the Time Alarms (alarm 1–3)
Step 1
Without inserting a test strip, press the ◀
and S buttons simultaneously for 3 seconds
to enter the time alarm setting. 'alarm1'
will be displayed while 'OFF' blinks on the
screen.
Step 2
On pressing the ▶ button, 'alarm1' is set and
'On' is displayed on the screen. Press the ▶
button again to cancel 'alarm1' . 'OFF' will
blink on the screen.
Step 3
Press the ◀ button to adjust the time of
alarm 1. A number representing the time
will blink on the screen. Press the ▶ button
to set the time.
www.i-sens.com 35