ETI 54677441 Guía De Uso Y Cuidado página 6

Installation (continued)
3
Feeding the wires
NOTE: Put the gasket (BB) on any knock out hole of the fixture to better protect the wires.
Feed the electrical connection wires through any knock
out hole and then through the mounting bracket (AA). The
connection wires can be held in place by the metal tabs,
if needed.
BB
4
Connecting the wires
Connect the hot and neutral (black and white) wires from the housing (A) to the same color wires from the
electrical box.
Cover the wire connection using the single wire connector (CC).
Connect the green wire from the housing (A) to the grounding wire from the electrical box. Secure together
using a single wire connector (CC).
CC
6
AA
AA
A
Metal tabs
Knock out holes