Machine Specifications; Safety Labels & Symbols; Intended Use Of This Power Tool; Prohibited Use Of This Power Tool - Evolution R255 SMS Instrucciones Originales

MACHINE SPECIFICATIONS

MACHINE
Motor (220-240V ~ 50 Hz)
Motor (110V ~ 50 Hz)
Speed No Load
Weight (Net)
Dust Port Diameter
Tool Dimensions (H x W x L) (0° / 0°)
360 x 705 x 730mm
(Note: Dimensions taken with saw head down.)
Cable Length
CUTTING CAPACITIES
Mild Steel Plate - Max Thickness
Mild Steel Box Section - Max Wall Thickness
(50mm mild steel box section.)
Wood – Max section
Minimum size work-piece
L:140 x W:20 x D:3mm
(Note: Any work-piece smaller than the recommended minimum
work-piece requires additional support before cutting.)
MAXIMUM CUTTING ANGLES
Mitre
Bevel
MITRE BEVEL
0° 0° 300mm (11-3/4 In.)
0° 45° 300mm (11-3/4 In.)
45° 0° 210mm (8-1/4 In.)
45° 45° 210mm (8-1/4 In.)
50˚ 0˚ 192mm (7-9/16 In.)
50˚ 45˚ 192mm (7-9/16 In.)
BLADE DIMENSIONS
Diameter
Bore
Thickness
LASER
Laser Class
Laser Source
Laser Output Power (Max)
Wave Length (Nm)
NOISE EMISSION DATA*
Sound Pressure L A (No-Load)
P
Sound Power Level L W A (No-Load)
Uncertainty, K & K
pA WA
*Noise emission test according to EN 62841-1 & EN 62841-3-9.
4
www.evolutionpowertools.com
METRIC IMPERIAL
2000W 9A
1600W 14.5A
2500 min 2500 rpm
-1
15.3kg 33.7lb
35mm 1 -3/8 In.
14- 3/16 x 27-3/4
x 28-47/64 In.
R255SMS - 2m R255SMS - 6ft 6 In.
R255SMS+ - 3m R255SMS+ - 9ft 10 In.
METRIC IMPERIAL
6mm 1/4 In.
3mm 1/8 In.
300 x 80 mm 11-3/4 x 3-1/8 In.
L:5-1/2 x
W:7/8 x D:1/4 In.
LEFT RIGHT
50˚ 50˚
0˚ - 45˚ N/A
MAX WIDTH MAX DEPTH
80mm (3-1/8 In.)
45mm (1-3/4 In.)
80mm (3-1/8 In.)
45mm (1-3/4 In.)
80mm (3-1/8 In.)
45mm (1-3/4 In.)
METRIC IMPERIAL
255mm 10 In.
25.4mm 1 In.
2mm 0-5/64 In.
Class 2
Laser Diode
≤1mW
650
110V: 95,8 dB(A) / 220-240V: 95,8 dB(A)
110V: 108,8 dB(A) / 220-240V: 108,8 dB(A)
K=3 dB(A)
www.evolutionpowertools.com
SAFETY LABELS & SYMBOLS INTENDED USE OF
(1.8)
THIS POWER TOOL
WARNING: Do not operate this machine
if warning and/or instruction labels are WARNING: This product is a Multi-material
missing or damaged. Contact Evolution sliding mitre saw and has been designed
Power Tools for replacement labels. to be used with genuine Evolution blades
rated for this machine. Only use blades
Note: All or some of the following symbols designed for use in this machine and/
or those recommended specifically by
may appear in the manual or on the product.
Evolution Power Tools Ltd.
Symbol Description
WHEN FITTED WITH A CORRECT BLADE
THIS MACHINE CAN BE USED TO CUT:
V
Volts
• Wood, Wood derived products
A
Amperes
Hz
• Wood with nails,
Hertz
• 50mm mild steel box section with 3mm wall
min (RPM)
-1
Speed
• 6mm mild steel plate at HB 200-220.
~
Alternating Current
Note: Wood containing non galvanised nails or
n
No Load Speed
o
screws, with care, can be safely cut.
Note: Not recommended for cutting
Wear Safety Goggles
galvanised materials or wood with embedded
galvanised nails. Cutting galvanised steel may
Wear Ear Protection
reduce blade life.
Do Not Touch,
Keep hands away
PROHIBITED USE
OF THIS POWER TOOL
Wear Dust Protection
WARNING: This product is a Multi-material
Wear Hand Protection sliding mitre saw and must only be used as
such. It must not be modified in any way,
CE certification
or used to power any other equipment or
drive any other accessories other than those
Waste Electrical and
mentioned in this Instruction Manual.
Electronic Equipment
Read Manual
(1.13)
intended for use by persons (including
WARNING
children) with reduced physical, sensory or
mental capabilities, or lack of experience
Laser Warning
and knowledge, unless they have been
given supervision or instruction concerning
Double Insulation Protection
the safe use of the product by a person
responsible for their safety and who is
Fuse
competent in its safe use.
Triman - Waste Collection
& Recycling
5
(MDF, Chipboard, Plywood, Blockboard,
Hardboard etc),
at HB 200-220,
WARNING: This product is not
EN
ES
DE
FR
IT
PL
PT
RO