Caution And Observations Before Turning On The Appliance - Skymsen MAXICONV VP Manual De Instrucciones

remove plug from the socket.
Provide space for a comfortable operation thus avoiding accidents. Water or oil spilled on
the floor will turn it slippery and dangerous.
Make sure the floor is clean and dry.
If any work is to be made by two or more persons, coordination signs will have to be given
for each operation step. Every step of the operation shall be taken only if a sign has been
made and responded.
4.1.3 Advices
In case of power shortage, immediately turn the machine OFF.
- Only use recommended or equivalent lubricants, oils or greases.
-Avoid mechanical shocks as they may cause failures or malfunction.
-Avoid penetration of water, dirt or dust into mechanical or electrical components of the
machine.
-Do not modify original characteristics of the machine.
-Do not remove, tear off or maculate any labels attached to the machine. If any labels
have been removed or are no longer legible contact your nearest Authorized Technical
Assistance for replacement.

4.2 Caution and Observations before Turning on the Appliance

IMPORTANT
Carefully read ALL INSTRUCTIONS of this manual before turning the machine
ON. Check that you have completely understood all information. If you have any
question contact Skymsen or the closest Authorized Technical Assistance.
4.2.1 Danger
An electric cable or electric wire with damaged jacket or bad insulation could cause
electrical shocks as well as electrical leak. Before use, check conditions of all wires and
cables.
4.2.2 Advices
Be sure ALL INSTRUCTIONS in this manual have been thoroughly understood. Every
function and operational procedure have to be very clear to the operator. Contact your
nearest Dealer for further questions.
Any manual command (switch, button or lever) shall be given only after being sure it is the
19