Dexter 150MD2.5 Instrucciones Legales Y De Seguridad página 169

d) Always feed the bit into the material in the same direction as
the cutting edge is exiting from the material (which is the same
direction as the chips are thrown). Feeding the tool in the wrong
direction causes the cutting edge of the bit to climb out of the work and pull
the tool in the direction of this feed.
e) When using rotary files, cut-
tungsten carbide cutters, always have the work securely clamped.
These wheels will grab if they become slightly canted in the groove, and can
kickback. When a cut-
a rotary file, high-speed cutter or tungsten carbide cutter grabs, it may jump
from the groove and you could lose control of the tool.
NOTE: Only those accessories are listed that are permitted to be used with the
tool.
ADDITIONAL SAFETY INSTRUCTIONS FOR GRINDING
AND CUT
SAFETY WARNINGS SPECIFIC FOR GRINDING AND
ABRASIVE CUT
a) Use only wheel types that are recommended for your power tool
and only for recommended applications. For example: do not grind
with the side of a cut-
peripheral grinding, side forces applied to these wheels may cause them to
shatter.
b) For threaded abrasive cones and plugs use only undamaged wheel
mandrels with an unrelieved shoulder flange that are of correct size
and length. Proper mandrels will reduce the possibility of breakage.
c) Do not "jam" a cut-
attempt to make an excessive depth of cut. Overstressing the wheel
increases the loading and susceptibility to twisting or snagging of the wheel
in the cut and the possibility of kickback or wheel breakage.
d) Do not position your hand in line with and behind the rotating
wheel. When the wheel, at the point of operation, is moving away from
your hand, the possible kickback may propel the spinning wheel and the
power tool directly at you.
grabs, the wheel itself usually breaks. When
F OPERATIONS
F OPERATIONS:
wheel. Abrasive cut- wheels are intended for
wheel or apply excessive pressure. Do not
169
2. SAFETY INSTRUCTIONS
wheels, high-speed cutters or
FR
ES
PT
IT
EL
PL
UA
RO
EN