Project Source 21-K822-PSD Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. Turn off water at the supply valve under the sink or at
the main water supply, disconnect the supply line, and
remove old faucet.
Clean and dry surface area where new faucet will be
mounted.
2. Place faucet (A) in position on sink so handles turn
forward. From under sink, thread mounting nuts (AA)
onto faucet (A). Tighten mounting nuts (AA). Do not
overtighten.
Hardware Used
Mounting nut
AA
3. IF INSTALLING OPTIONAL SIDE SPRAY
Insert spray support (C) through far right hole on the
sink (3.1). Screw the mounting nut (BB) onto the spray
support (C) from underneath the sink and hand tighten
only.
Hardware Used
BB Mounting nut
1
2
x 2
3
x 1
4
A
AA
C
3. 1
BB
Lowes.com