Flash /Call Waiting; Auto Standby; Hi/Low/Off; Last Number Redial - GE 25831 Guia Del Usuario

NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the
DELETE button until all of the digits are erased.
A S
UTO TANDBY
If you place the handset in the cradle while the handset is off the hook (during a
call), the call is automatically disconnected.
R

HI/LOW/OFF

INGER
There are two ways to set the ringer to HI/LOW/OFF . One is the traditional way as
described in the Programming Functions; Handset Setup; Ringer Volume menus. The
other one is this short cut to ringer menu.
1. Make sure the phone is OFF (not in talk mode).
2. Press the #PAUSE/RINGER button to display 1HI 2LOW 3OFF.
3. Use the touch tone pad on the handset to select 1, 2 or 3, or use the CALLER ID-VOL
(- or +) button to scroll to your selection. HI is the default setting.
4. Press #PAUSE/RINGER button again to save and display the new selection for a
few seconds.
F /C W
LASH ALL
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call
Waiting calls. During a phone call, you will hear a beep to indicate another call is
waiting on the line and Caller ID information for the waiting call shows on the
handset display.
• To connect to the waiting call, press the FLASH button on the handset, and your
original call is put on hold.
• To switch between the two calls, press the FLASH button.
TIP: Do not press the TALK/CALLBACK button on the handset to activate a
custom calling service, such as call waiting, or call will disconnect.
L N
AST UMBER
You may redial a number up to 32 digits long.
To quickly redial the last number you dialed:
1. Press the TALK/CALLBACK button.
2. Press the REDIAL button.
-OR-
AITING
R
EDIAL
21