Eleting All Cid Records; Hanging The Battery - GE 25831 Guia Del Usuario

D A
ELETING LL
1. Make sure the phone is OFF (not in talk mode).
2. Use the CALLER ID-VOL (- or +) button to scroll to any CID record.
3. Press and hold the DELETE button until DELETE ALL? shows in the display.
4. Press DELETE button to erase all of the current CID records. The display shows
DELETED followed by NO CALLS .
NOTE: Press the *EXIT key on the handset to return to the standby mode.
C
HANGING THE
CAUTION: To reduce the risk of fire or personal injury, use only the
battery 5-2660 that is compatible with this unit.
1. Make sure the telephone is OFF (not in talk mode)
before you replace battery.
2. Remove the battery compartment cover.
3. Disconnect the cord attached to the battery pack from
the jack inside the battery compartment and remove
the battery pack from the handset.
4. Insert the new battery pack and reconnect the
battery plug.
5. Put the battery compartment cover back on.
6. Place handset in the base or handset charge
cradle to charge. If you don't charge the handset
battery properly (for 16 hours) when you first set
up the phone and/or when you install a new
battery pack, the battery 's long-term
performance will be compromised.
NOTE: If the battery is not properly installed in the handset, or if the battery pack is
not properly connected to the jack inside the battery compartment. "NO BATTERY"
shows in the display when the handset is placed in the charging cradle.
32
CID R
ECORDS
B
ATTERY
Battery
pack
plug
Battery compartment jack
Battery
compartment
Battery
pack