Mepamsa B600 PIRO Instrucciones De Uso Y Mantenimiento página 11

Programming the end of cooking with a
manual start of cooking.
-operate on wheel "B" the cooking time
(max. 110 minutes);
-set the thermostat knob on a desired
temperature and the selector knob (if
any) on the desired cooking function.
-a minute counter ringing will advise that
the cooking time is over and the oven
will stop automatically.
-return alI knob to off position.
Important: to have the oven work
manually, at the end of the cooking
return to position on window "D" at
the end of the cooking.
End of Cooking
The function of the programming timer is to
make the oven turn on for a pre-determined
amount of time. (Pict. 2)
1.To operate.
After having set the oven switch knob to
the desired temperature, turn the timer
knob in a clockwise direction to the desired
cooking time (maximum 110minutes).
After the set time runs out, the timer will
have returned to position "O" and the oven
will automatically turn off.
2.Manual position.
If the cooking time is longer than the hours
programme, or if you wish to use the oven
manually, to turn it off when you desire,
turn the knob to position
3.Automatic pyrolitic cleaning.
The self-cleaning function
after having set the oven switch knob to turn
the timer knob in a clockwise direction to 90
minutes cooking time (it's possible turn the
timer knob to 110 minutes if the oven is very
dirty).
During the pyrolitic function the oven light is
disabled.
All manuals and user guides at all-guides.com
110
Pict. 2
9