Electrical Connection - Mepamsa B600 PIRO Instrucciones De Uso Y Mantenimiento

Technical details
This appliance conforms to the
standard 73/23 CEE and 93/68 CEE
EMC 89/336 CEE.
Voltage regulations
230 V phase + neutral.
Built-in oven dimension (mm):
Length : 440
Depth : 390
Height : 340
Volume : 59 Lt
Maximum intake of oven : 3,68 kW
4
All manuals and user guides at all-guides.com
Built-in installation
IMPORTANT: The unit must be correctly
installed in accordance with
Manufacturers instructions and by
qualified person. Maintenance and
service must be carried out after the
power supply has been disconnected.
ELECTRICAL CONNECTION: Before
connecting the appliance to the mains,
ensure that:
• The voltage corresponds to the voltage
specified on the rating plate at the
bottom of the surround.
• The overload cut-off device and the
domestic system can withstand the load
of the appliance (see rating plate).
• The power supply system is provided
with an efficient earth connection and
that the socket or omnipolar switch,
with minimum contact opening of 3mm,
is easily accessible once the appliance
has been installed.
• If the plug is not easily accessible, the
installation personnel must provide an
omnipolar switch with contact opening
distance equal to or greater than 3mm.
If further mains cable is needed, it must
be with minimum section are of 1,5 mm
type H05RR-F.
Sufficient cable must be left for easy
maintenance of the appliance.
Warning: this appliance must be
earthen.
Proper earthling is mandatory for the
appliance.
Our company declines any liability for
failures in the earth connection that is
not in compliance with the regulation in
force.