Mepamsa B600 PIRO Instrucciones De Uso Y Mantenimiento página 25

All manuals and user guides at all-guides.com
PIROLITIC CLEANING
Switch on the oven and select the self-cleaning function.
On the temperature display you will see the message PIRO , while on the
function display you see a self-cleaning set time of 1h 30m.
The 2 dots betwen 1 and 30 blink for a 4 secs. time, which means you can
set your favorite self-cleaning time or the ending time of that operation.
To do that, follow the previous instructions concerning the programming of
cooking.
The maximum time which can be set is of 3 hours, the minimum is of 30
minutes; to set the time press the
Once the time is set, the symbol A enlights on the time display, which
means an automatic operation is on.
The door is locked and the Controls Lock Function is on, as you can see by
the symbol on the display.
During the self-cleaning function it is possible to see the remaining time,
but you cannot neither change the remaining time nor change the ending
time.
The oven light remains off during this operation.
This function allows to clean the oven by increasing the temperature up to
465°C.
The ashes which can result at the end of the operation can be removed with
a soft cloth, once the oven has cooled down.
Warning:
All the accessories and all the considerable food residuals must be removed
from the oven inside before proceeding with the self-cleaning operation.
key, then use the + e - keys.
23