Mepamsa B600 PIRO Instrucciones De Uso Y Mantenimiento página 14

Setting the time of day
When the oven is first connected to the mains
electricity supply or following a power failure,
three zeros will flash in the time display. To
set the time of day press and hold the
and buttons and at the same time press
the + or -buttons to set the correct time using
the 24 hour clock system. The speed at which
the digits change increases the longer the + or
- button is held. Release the buttons once the
time has been set to start the clock running.
Manual cooking without using the
programmer
To use manually the oven, that is, without
the auxiliary programmer, it is necessary
to cancel the flashing "AUTO" by pushing
to button.
If the "AUTO" message is displayed in
permanent mode, indicating that the oven
is programmed, it is impossible to set the
timer to manual function and therefore the
oven cannot be switched on. In this case
the program must be firstly cancelled by
pressing , then the manual function
can be set.
Setting the minute minder
The minute minder can be used to time
any period from 1 minute to 23 hours 59
minutes.
Automatic cooking (start and finish)
• Set the length of cooking time by
pushing the button.
• Set the and of cooking time by pushing
the button.
• Set temperature and cooking program by
using the thermostat knob and the
selector knob.
After this setting symbol "AUTO" will flash,
this means the oven has been
programmed.
12
All manuals and user guides at all-guides.com
An example: cooking lasts 45 minutes and is
expected to stop at 14.00.
- Push until having set 0.45,
- Push until having set 14.00.
After having finished the setting, the clock
hour will appear on the panel and "AUTO"
symbol will flash permanently.
This means the cooking program has been
memorised.
At 13.15 h. (15 minutes to 14) the oven turns
on automatically.
During cooking time the
"AUTO" are flashing.
At 14.00 the oven turns off automatically a
buzzer goes off until it is stopped by pushing
the button.
Semi-automatic cooking
A. Set the length of cooking time
B. Set the end of cooking time
A). Set the length of cooking time by pushing
the button.
The oven will turn on immediately "AUTO"
and the symbols will flash.
At the end of cooking, the oven will turn off, a
buzzer will goes off until it is stopped as
above described.
B). Set the end of cooking time by pushing
the button. The oven will turn on
immediately. "AUTO" and
When the set cooking time has elapsed, the
oven will turn off and buzzer will ring until it
is stopped as above described.
The cooking program may be seen at any
moment by pushing the corresponding
button.
The cooking program may be cancelled at any
moment by pushing the
appears on the panel.
Then by pushing the
work manually.
button and
will flash.
until zero
button the oven can