5.3 Using the water fountain
(for certain models)
C
The first few glasses of
water taken from the
fountain will normally be
warm.
C
If the water fountain is
not used for a long time,
dispose of the first few
glasses of water to get
clean water.
You must wait approximately 12
hours to get cold water after first
operating.
Use the display to select the water
option, then pull the trigger to get
water. Remove the glass shortly
after pulling the trigger.
5.4 Filling the fountain
water tank
Open the water tank's lid, as shown
in the figure. Fill in pure and clean
drinking water. Close the lid.
IT
PT
SL
31