Technical Data; Noise Data; Vibration Information - Worx WG183E Manual Original

10. LOCK OFF SWITCH
11. BATTERY INDICATOR LIGHT
12. CUTTING HEAD (SEE FIG.I)
13. SPOOL CAP (SEE FIG. J)
14. CAP RELEASE LATCH (SEE FIG.J)
15. SPOOL (SEE FIG.J)
16. EYELET (SEE FIG.J)
* Not all the accessories illustrated or described
are included in standard delivery.

TECHNICAL DATA

Type Designation: WG183E WG183E.9 (1-designation
of machinery, representative of Cordless Grass
Trimmer)
Voltage
No Load Speed
Cutting
Diameter
12
Line Diameter
Line length
Battery type
Battery Model
Charger Model
Input: 100-240 V~50/60
Charger rating
Output 1: 20 V
Output 2: 20 V
Charging time
(approx.)
Battery pack:
2.0 Ah (1 pc)
2.0 Ah (2 pcs)
Machine
Weight
**Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
*** Charger output 1 and output 2 mean two ports with
the same output voltage and current.
Cordless Grass Trimmer
WG183E WG183E.9
40 V MAX (2x20 V MAX) **
6800 /min
33 cm
1.65 mm
5 m (Dual-Exit)
Lithium-ion
WA3551.1(2.0 Ah)
WA3772
Hz , 50 W
, 2.0 A***
, 2.0 A***
65 mins
130 mins
2.9 kg
ACCESSORIES
Battery pack (WA3551.1)
Charger (WA3772)
Spool (WA0007)
Spool cap(WA0216)
Safety guard
Auxiliary handle
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the lawn trimmer. Refer to the accessory packaging for
further details. Store personnel can assist you and offer
advice.

NOISE DATA

A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection.
/

VIBRATION INFORMATION

/
/
Typical weighted vibration
Uncertainty
/
The declared vibration total value may be used for
comparing one tool with another, and may also be used in
a preliminary assessment of exposure.
WARNING: The vibration emission value during
/
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
2.2 kg
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome if
WG183E WG183E.9
2 /
1 /
1 1
1 1
1 1
1 1
L = 75.8 dB(A)
pA
3.0 dB(A)
L = 90.2 dB(A)
wA
3.0 dB(A)
a <2.5 m/s
h
K = 1.5 m/s²
EN
2