Brakes - Wayscral EVERYWAY E-50 Manual Del Usuario

significant wear or there is a visible groove on one of the tyres, replace
it before using the bicycle. The manufacturer provides a pressure range
on the side of the wheel rim and in the following table. The pressure
should be adapted to the weight of the user.
Model Bike size
EVERYWAY
E-50

2. Brakes

Before each use, check that the front and rear brakes are in perfect
working order.
The lever on the right activates the rear brake. The lever on the left
activates the front brake.
It is recommended that you distribute your braking force approximately
60/40 between the front and rear. The brake lever should not be in
contact with the handlebars, and the sheaths should not be bent at right
angles so that the cables can slide with a minimum of friction.
Damaged, frayed or rusty cables must be changed immediately
WARNINGS:
•
•
V-Brake adjustment
The pads exert pressure directly on the rim of the wheel. The intensity
of the pressure is controlled by a lever connected to the brake by a
cable. Do not operate the brake lever when the wheel is detached from
the frame.
(inner tubes and tyres)
26"
26 x 1.75
In rain or damp weather, braking distances are
longer. It is recommended to pre-empt your
braking in this situation.
When cornering and braking, the handlebars can
have a negative influence on the response time of
the cyclist.
Size
55
Pressure
PSI Bar
40 3
EN