Generating A Printout - KERN CGB Serie Instrucciones De Funcionamiento

Generating a Printout

Purpose
You can generate a printout of weights
as well as other measured values and
identification codes for documentation
purposes. You can format the printout
to meet individual requirements.
Features
You can choose to print an individual
weight or net, gross and tare weights.
Line format: You can configure a data ID
code of up to 6 characters each for the
values to be printed; this data ID code is
printed at the beginning of a line.
You can generate printouts either automa-
tically or by pressing the [PRINT] key; the
printout can be dependent or indepen-
dent of the balance's stability parameter.
You can have the following values output
automatically if menu code 7. 1. 4
(printout with data ID codes) is selected:
– Average piece weight (wRef)
– Reference sample quantity (nRef)
60
Factory Settings of the Parameters
Manual/automatic print mode:
In the manual mode, an individual value
is printed when you press the print key;
in the automatic mode, values are prin-
ted depending on the stability parameter
selected for the balance:
Manual after stability (6. 1. 2).
Line format:
You can configure a data ID code of up
to 6 characters for each of the values
to be printed: printout of the net, tare
and gross values; reference sample
quantity, average piece weight with data
ID codes (7. 1. 4).
§ To set the parameters, please see
the chapter on "Settings"