Date Format - palintest Kemio Manual Del Usuario

27
Settings
Select SETTINGS from the CONFIGURATION menu.

Date Format

Set the date format (dd/mm/yyyy or mm/dd/yyyy) by
pressing DATE FORMAT and then pressing the desired
format and pressing the back button.
Date
Set the date by pressing DATE, entering the correct date
using the number pad and pressing SET.
Time
Set the time by pressing TIME, entering the correct time
using the number pad and pressing SET.
Language
Set the display language by pressing LANGUAGE, then
pressing the desired option and pressing the back button.
Units
Set the instrument display units by pressing UNITS, then
pressing the desired option and pressing the back button.
Visual
Set the screen brightness and sleep delay. These settings
affect the Kemio's battery life.
The sleep delay can be set between 1 minute (Kemio shuts
itself off afer 1 minute of inactivity), 2 minutes, 5 minutes
and "No sleep" where Kemio must be shut down manually.
Details
Press DETAILS to view instrument details. This information
is used for troubleshooting problems.
• Instrument Serial Number
• Date of Manufacture
• Hardware Revision
• Main Firmware Revision
• Bootloader Firmware Revision
• Gauge Firmware Revision
• System Calibration Date
• Total Number of Tests Performed
Test Settings
Select whether to enable or disable certain data
enrichment and traceability steps from the test procedure.
User Settings
Set how user information is tagged to a test.
• Scan barcode. Add and select users by scanning barcodes.
• Manual Entry. Select users from a list.
• Off. No user selecetion screen appears at the start of a
test. The user tagged to the result will be DEFAULT.
28 28 28