Care And Maintenance - palintest Kemio Manual Del Usuario

35

Care and Maintenance

Kemio
Kemio is IP67 rated, however the electrical contacts inside the
front lid must be dry during testing. Open the front lid of the
arm and wipe the contacts with a dry lint-free cloth to remove
any moisture before inserting a sensor.
The touch interface is functional with droplets on the screen but
responds best when dry.
To maximize battery life, use deep charge cycles: use the
battery until it is very low before charging to 100%.
Kemio is an analytical instrument. Although it was designed to
perform in difficult application evironments, it is still a precise
measurement instrument. Do not handle roughly. Do not drop
the instrument or strike it with an object.
Kemio should be kept clean to ensure it is free from bacteria
and there are no interferences from contamination when
conducting measurements. Best practice is to use a dry and
absorbent cloth to remove any excess fluids or spillages from
the instrument as they occur.
Alcohol wipes can be used to clean the instrument if required.
Store Kemio in a cool, dry location.
Sample Vessel
Rinse sample vessel before use with sample, and rinse after
use with deionized water to prevent cross contamination.
Remove and empty the sample vessel after testing. Do not
leave sample water or sensors in the instrument as bacteria
could form.
Sensors
Do not handle or store sensors roughly in their packaging. Do
not touch the surface of the electrodes where the chemicals
are dosed, as this will affect the measurement result.
Sensors are single use. They can be disposed of with normal
waste.
If keeping sensors for over 1 year, store them in a refrigerator
to ensure they reach their expiration date.
Check Standards
Keep check standards clean and dry.
Check standards should not be used after their stated expiry
date. Replacement sets of KEMC10 are available for purchase.
36