Health O Meter 500KL Instrucciones De Uso página 12

500KL ASSEMBLY INSTRUCTIONS (CONTINUED)
8. Position and secure the
connected columns A and B to
scale platform C. Locate the 4
column mounting screws
previously removed in step 2.
Insert the 4 screws through the
bottom of scale platform C
screw holes and into Column
B. Ensure that washers are
located between the screw
heads and the scale platform
C screw holes. Using a Phillips
head screwdriver, tighten the
screws to secure Column B to
the base of platform C.
9. Height Rod Assembly:
Locate the upper height rod D
and lower height rod E. Align
upper height rod D with lower
height rod E. Snap the locking
tab into place. Ensure locking
tab is securely locked.
Notch
12
Upper Height Rod D
Locking Tab
Lower Height Rod E