1 Charging port: Insert the micro-USB cable
in this jack.
2 Power switch: Turns the charging case on
and off.
3 LED indicator: Blinks green when the case
is turned on and charging the earphones.
Turns solid green while the case is being
charged through the micro USB port.
4 Magnetic charging socket: Place
earphones in each side to recharge them.
5 Removable ear hooks, cotton
memory foam and silicone tips:
Provides a comfortable and secure fit.
6 Microphone: Picks up your voice.
Earphone multifunction buttons with LED
status indicators:
Multifunction button
Mode
Press and hold to go into pairing mode.
Pairing
Press and hold again to reconnect wirelessly to a
memorized device
Briefly press to answer and end an incoming call
Press twice to enable the voice command and
dial a phone number in supported devices
Hands-free
Press and hold to redial the last number called
mode
(on supported devices)
Press and hold to reject or ignore an incoming
call
Function
Multifunction button
Mode
Press and hold to answer a second incoming call
and put the current one on hold
Playback
Briefly press to play and pause audio
mode
LED indicators
Status
Charging
The LED turns solid red
Charging complete
The LED turns solid blue
Power on and off
The red LED lights up for one second
Red and blue LEDs light up alternatively
Bluetooth
wireless
®
pairing
Left earbud blue LED lights up twice every
Left and right
5 seconds
Right earbud lights up once every 5
channel enabled
seconds
Red and blue LEDs light up alternatively on
Pairing mode
left earbud
active
Red LED lights up once every 5 seconds
Standby without an
active connection
Left earbud blue LED lights up twice every
Standby with an
5 seconds
active connection
Right earbud blue LED lights up once
every 5 seconds
Low battery
Red LED blinks 3 times every 20 seconds
Blue LED lights up twice every 5 seconds
Incoming call/
Dialing
Blue LED lights up twice every 5 seconds
Phone is on
active call
Function
Function