Publicidad
Idiomas disponibles
Idiomas disponibles
- Always unplug the product before cleaning the filter.
- The pre-filter is reusable by removing dust or cleaning it with water.
- If the pre-filter is not cleaned for a long time, the product performance may deteriorate.
TIPS
- Max2 filter cannot be cleaned and reused. Never clean them with water.
■ Cleaning the pre-filter (every 2 ~ 4 weeks)
1. Pull the upper part of the cover to
reveal the pre-filter.
2. Press down on the top clip of the pre-filter and pull it out.
∗ To prevent dust from falling off, remove the filter carefully without
exerting a shock.
3. Clean the pre-filter with a vacuum cleaner or with water
depending on the level of contamination.
4. Install the pre-filter after removing the moisture completely.
Fit the front cover back to the product.
∗
When refitting the pre-filter to the product, fit it in the hook correctly.
15
16
Publicidad
