Anthogyr 10400X Instrucciones De Uso página 19

IV.2 - Characteristics of MDs
References
Ratio
Colour code
Adjustable depth stop
system
Light
Motor connection
standard
Maximal speed of motor
(rpm)
Maximum torque of motor
(N.cm)
Maximum torque of
instrument (N.cm)
Rotary instruments
according to EN ISO 1797-1
> ø (mm)
> Lg max (mm)
> ø max in the active part
(mm)
Spray water flow
according to ISO 7785-2
(ml/min)
S3 10% intermittent mode (1 min on/ 9 min off). The authorised relative
load duration is 1 minute per 9 minutes of pause.
IV.3 - Adaptor for LED MD:
Intended to be placed instead of the bulb in dental motors with a INTRAmatic
1 type connection, the adaptor for LED MD will be supplied with power
LUX
®
from the treatment unit.
Electrical characteristics for power of adaptor and/or LED MD:
• Nominal supply voltage for the adaptor for LED MD: 3.4 V CC
• Nominal supply voltage range for the adaptor for LED MD: 3.0 – 3.6 V CC
• Maximum current: 400mA
INTRAmatic LUX connection system - Kavo
1 ®
IMPLANTEO LED
2 ®
connection. Can be assembled on a INTRAmatic LUX
been replaced by an adapter for LED "10510" contra-angles.
The torque can be reached providing the motor used is powerful enough: for example,
3
the Implanteo motor by Anthogyr. In general, it is possible to limit the motor torque on
the operating unit.
Indicative values. In the event of the use of longer or bigger rotary tools, the user is
4
responsible for choosing the right operational conditions that avoids all risks to patients or
third parties. Follow the instructions for use, in accordance with the tools manufacturer's
instructions.
No
No
ISO 3964
Anthogyr connection system. E-PLUS or E-PLUS Intra specific
20 : 1
Green
Yes No Yes
Yes (light guide)
ISO 3964
40 000
6,5
80
3
Type 1
2,35
40
4
10
4
> 50
registered trademark
®
type motor for which the bulb has
®1
No Yes
Yes (LED in the
contra- angle)
ISO 3964
1 2
17