Neumann Mission Guia De Instalacion página 10

10
EN
2.2
A feature, such as flowers or shrubs that are close
to the mowing boundary, should be part of the
boundary as shown in the picture.
2.3
If there is an island that sits inside your lawn where
you don't want Mission
®
path as shown in the picture to peg your wire.
The wire should run from the perimeter to outline
the defined island and then return back to the
perimeter. The boundary wire in between the
island and perimeter should be laid close together
and held in place by the same wire peg. During
operation, the Mission
®
over this part of the wire.
2.4
In the case of two islands that are close to each
other, it would be convenient to lay out the wire as
illustrated in the picture.
The Mission can travel freely over the boundary
®
wire in between the islands and the mowing
boundary.
to go, please follow the
will be able to freely pass