Neumann Mission Guia De Instalacion página 12

3. Connect the Base to the Boundary Wire
12
EN
IN
OUT
3.1
Cut the end of the wire to a length that's
appropriate convenient for reaching the clamps.
NOTE: Too long redundant wire may cause the
signal problem.Strip the two ends of the wire.
3.2
When connecting to the charging base there will be
an IN-wire and an OUT-wire, as shown. Connect the
IN-wire to the red clamp of the charging base and
the OUT-wire to the black clamp.
Then close the cover.
NOTE: Please fix the boundary wire around the
charging base firmly with the wire pegs.