Neumann Mission Guia De Instalacion página 8

Your Mission needs to know where to mow. This is why you have to mark its working area with a boundary
®
wire that will form an invisible fence. This wire will also guide your Mission
If your neighbor also uses a Mission
your Boundary Wire and your neighbor's.
1. Placing the Charging Base
First of all, find a spot for the charging base, taking into account the position of your outdoor socket since the
charging base only has a 15m power cord.
NOTE: Make sure the adaptor and the electrical socket are always kept in a dry area.
8
EN
, then you must keep a space of at least 0.5 metres between
®
1.1
The charging base should be placed along a straight
line, with the "IN" arrow pointing to the lawn. Allow 2m
distance with no obstacles both front and back of the
charging base. If possible, place the charging base in
the shade, and batteries are better recharged in a cool
place.
Make sure that your Mission
clear of any obstacles.
1.2
Feed the boundary wire through the tunnel
underneath the charging base.
to its charging base.
®
can run on a flat area,
®