Neumann Mission Guia De Instalacion página 9

2. Pegging Your Boundary Wire
When pegging the boundary wire for the first time, it is recommended to use a normal lawn mower or a grass
trimmer to cut the grass along the boundary. Then the wire can be laid as close as possible to the ground to
prevent the Mission accidentally cutting the wire. The boundary wire is powered with a very low voltage so
®
that it is totally safe to human beings and pets.
2.1
When laying the boundary wire, use the distance gauge
to keep a 45cm* space between the wire and the
boundary.
Each wire peg should be placed around 80cm apart.
Use the provided distance gauge to ensure proper
installation.
NOTE:
Keep the boundary wire straight and tight
between the pegs, there should be no slack wire
between the pegs.
9
EN