Selecting Channels; Default Channel Settings For Cps - Motorola Solutions CLP Serie Manual Del Usuario

MN006179A01-AC
Chapter 2: Getting Started
2.8

Selecting Channels

Procedure:
1 Press the Menu button.
You hear a voice prompt to change channel by pressing the (+) or (-) button.
2 Select the required channel.
The LED indicates the color of the new channel.
3 Press the PTT button to confirm or the channel is activated after three seconds hang time.
2.8.1

Default Channel Settings for CPS

The table describes the default channel settings for Customer Programming Software (CPS).
Table 3: Channel Settings for CPS
CLP1010e & CLP1013e Single-Channel Mod-
els
Channel LED Status
1
22
CLP1080e & CLP1083e Multi-Channel Mod-
els
Color Channel
Red 1
2
3
4
5
LED Status Color
Red
Green
Yellow
Blue
Purple