Charging A Stand-Alone Battery With The Drop-In Tray Suc; Charging A Stand-Alone Battery With The Drop-In Tray Muc- Optional Accessory; Estimated Charging Time; Charging Radio With The Drop-In Tray Suc - Motorola Solutions CLP Serie Manual Del Usuario

Item Number
1
3.6.1

Charging a Stand-Alone Battery with the Drop-in Tray SUC

Procedure:
1 To charge the battery, insert the connector of the power supply into the micro Universal Serial
Bus (USB) port on the front of the drop-in tray charger.
2 Connect the power supply to a proper AC outlet.
3 Insert the battery into the tray, with the inside surface of the battery facing the front of the
charger. See Stand-Alone Battery on page
4 Ensure that the slots in the battery are correctly engaged in the charger.
3.6.2
Charging a Stand-Alone Battery with the Drop-in Tray MUC-
Optional Accessory
Procedure:
1 Place the charger on a flat surface or mount it on the wall.
2 Insert the power cord plug into the jack on the MUC.
3 Plug the cord into an AC outlet and then into the charger.
4 Insert the battery into the charging pocket with the inside surface of the battery facing the front of
the charger.
5 Ensure that the slots in the battery are correctly engaged in the charger.
3.6.3

Estimated Charging Time

The following tables provide the estimated charging time of the battery.
Table 4: Estimated Charging Time
Charging Solution
Single Unit Charger
Multi-Unit Charger
3.7

Charging Radio with the Drop-in Tray SUC

Procedure:
1 Place the drop-in Tray Single Unit Charger (SUC) on a flat surface.
2 Insert the connector of the power supply into the Micro USB port on the front of the drop-in tray
charger.
3 Connect the correct power supply to a proper AC outlet.
Description
Micro-USB port
28.
High Capacity Li-Ion Battery
5.5 hours
4 hours
MN006179A01-AC
Chapter 3: Battery and Charger
29