Malfunction Table - NEFF C57W40N3 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Area
Cleaning agents
Door panels
Glass cleaner:
Clean with a dish cloth. Do not use a
glass scraper.
Glass cover for the
Hot soapy water:
cooking compart-
Clean with a dish cloth.
ment light

Malfunction table

Malfunctions often have simple explanations. Please refer to the
malfunction table before calling the after-sales service.
If a meal does not turn out exactly as you wanted, refer to the
Tested for you in our cooking studio section, where you will
find plenty of cooking tips and tricks.
Malfunction table
Problem
The appliance does not work
Three zeros are flashing in the dis-
play.
The appliance is not in operation. A
cooking time appears in the dis-
play.
The microwave does not switch on. The door was not fully closed.
It takes longer than before for the
food to heat up.
A signal sounds. The two dots in
the display are flashing.
Error messages
You can take remedial action yourself for some error
messages.
Error message
Error message "Er1", "Er4", "Er18" or "E305"
appears in the display.
Error message "Er11" appears in the dis-
play. "Button jammed"
28
Possible cause
Faulty circuit breaker
Plug not plugged in
Power cut
Incorrect operation
Power cut
The
button was not pressed after the set-
ƒ
ting had been made.
The
button has not been pressed.
ƒ
The microwave power setting is too low.
A larger amount than usual has been
placed in the appliance.
The food was colder than usual.
The appliance is in demo mode.
Possible cause
Technical malfunction.
The buttons are dirty or the mechanism
has jammed.
Area
Cleaning agents
Door seal
Hot soapy water:
Do not remove.
Clean with a dish cloth; do not scrub. Do
not use a metal or glass scraper for
cleaning.
Accessories
Hot soapy water:
Soak and clean with a dish cloth or a
brush.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out by one of our trained after-sales engineers.
Remedy/information
Look in the fuse box to make sure that the circuit
breaker for the appliance is OK.
Plug the plug in
Check whether the kitchen light is working.
Switch off the circuit breaker in the fuse box.
Reconnect it after approx. 10 seconds.
Reset the clock.
Press the
ƒ
Check whether food remains or foreign material
is trapped in the door. Make sure that the seal-
ing surfaces are clean. Check whether the door
seal is twisted.
Press the
ƒ
Select a higher power setting.
Double the amount = almost double the time
Stir or turn the food during cooking
Press the
1.
Press and hold the
2.
onds.
Demo mode is deactivated.
Remedy/Note
Call the after­sales service.
Press all the buttons several times. Clean
the buttons with a dry cloth. Open and
close the appliance door. If this does not
help, consult the after-sales service.
button or switch the appliance off.
button.
button.
°±²
o
button for three sec-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

C57w40s3

Tabla de contenido