Fulgor Milano FCLH 9008 ID WT Installación Uso Y Mantenimiento página 32

EN
• The cooking zone display shows
next to the continuous cooking level. When boiling is
complete, only the power level is displayed.
• Within 15 seconds, the continuous cooking level for the
boiling function can be changed to a higher or lower
continuous cooking level by selecting the cooking zone and
touching another cooking level on the slider
• It is also possible to switch to a higher continuous cooking
level after 15 seconds. A cooking level lower than the
continuous cooking level will deactivate the function (see
deactivating automatic boiling).
If the continuous cooking level is changed, the boiling time will
be recalculated (new boiling time minus the time previously
activated while automatic boiling was active).
Deactivating automatic boiling:
• The cooking zone must be selected
• Bringing the cooking level to a level below the continuous
cooking level set for automatic boiling deactivates the
automatic boiling function. Alternatively, the cooking zone
can be switched off by setting the cooking level to "0".
Automatic bridge
The system features an automatic bridge function detection
system.
As soon as the system has recognised that two or three zone
sensors are covered by a pan at the same time (such as a
large oval pan), the system automatically sets the bridge. The
brackets of the bridge and the slider appear and the user need
only set the cooking level.
10
Deactivation of the semi-automatic bridge:
for automatic boiling
• Remove the pan from the relevant zone
Chef Function
Setting the power level based on the position: as in some
professional kitchens, the position of the pan determines the
power level.
The function is activated by pressing the icon
At this point, the 3 "chef" zones will appear on the display,
corresponding to the bridge between zones 1-2-3, between
4-5, and 6-7-8, presenting as standard selected powers,
respectively 2 for the zone on the left, 6 for the central zone
and 9 for the right zone.
The pan can then be moved freely between the three zones to
increase or decrease the power supplied to the pan.
To change the default powers, simply select one of the three
zones. At this point the powers slider will appear, then simply
select a value from 1 to 9 or P.
To disable the Chef function, simply reselect the icon
Heating function
Activation:
The Heating function is temperature-controlled and available in
three stages. The power is adjusted automatically. To activate
this function it is necessary to select a cooking zone by pressing
and holding the same cooking zone for 2 seconds. A "Cooking
functions" sub-menu will then appear, with the possibility of
.
.