Fulgor Milano FCLH 9008 ID WT Installación Uso Y Mantenimiento página 33

choosing between two functions: Timer and Heating.
Then select "Heating" and a choice of 3 predefined settings
will appear: 40, 70 and 90°C.
Once one of the three temperatures has been chosen, a symbol
will appear on the display next to the previously selected
cooking zone
If the pan is not yet present in this zone, the heating symbol
and the missing pan symbol
The pan will start the heating phase until it reaches the set
temperature.
Deactivation:
To deactivate the heating function, it is necessary to select the
previously selected cooking zone and to set any cooking level,
or to set it to 0 to switch it off.
Child lock function
After turning on the control unit, it is possible to activate the
child safety mechanism. After activation of the child lock, the
child lock mode is set permanently. This means that even in
standby mode the child lock remains active.
Activating the child lock:
The child lock mode is available in the settings menu.
The settings menu is accessed by pressing the multifunction
button
By selecting the Block symbol in the relevant slider area, the
block menu is displayed. The child lock must be confirmed by
pressing the "off" symbol.
Subsequently the "lock on" mode will be activated.
If the induction hob is switched off, the following screen will
appear when switched on again.
will flash alternately.
To remove the lock, slide the "key" symbol towards the
"padlock" with your finger.
.
EN
11